Time:2020/4/30 18:07:02
SMT the work of the placement machine, the process and integrity of the placement machine suction nozzle will play an important role in the performance of the placement machine. As one of the important parts of placement machine, it is necessary to do a good job of daily maintenance and maintenance. In order to ensure that the placement machine suction nozzle before work is intact, so the usual use of the process to do a good job of maintenance: ( Note: Suitable Juki/ Yamaha/ Samsung/ Panasonic/ Fuji/ Siemens suction nozzle ) Ø SMT the surface of the suction nozzle with dustless cloth to remove dust; Ø Small aperture suction nozzle can be first with fine wire, and then blow with air gun; Ø the surface of the suction nozzle can’t be soaked in corrosive solution such as alcohol, otherwise the surface will fall off; Ø HOLDER wipe the cavity with a cotton stick, do not break the filter; Ø HOLDER claw teeth regularly with special grease; Ø According to the production of the best regular maintenance, usually do other maintenance work. For example: Panasonic cm602 suction nozzle maintenance (in series order maintenance): (1) Needle clean suction rod; (2) Wipe reflector; (3) Check the suction rod for deformation; (4) Air gun blow suction rod; (5) load machine to check the vacuum value cm602<=85.
|